Laminated bladder combined with thermobonded construction.
Guaranteed to keep ball pressure for longer thanks to Butyl / Latex bladder.
Thermobonded ball with textured component for optimum accuracy.
Optimum sphericity thanks to thermobonded construction.
5 mm foam outer cover for optimum comfort
- 100% Polyurethane
- 100% Rubber - Natural Rubber - Latex
- 100% Polyester
For this FIFA Pro quality football, our designers have used thermobonding technology (seamless) to guarantee perfect sphericity and more precise shots. In addition, this technology ensures better waterproofing while training in the rain. Finally, to optimise the sphericity of this ball, we chose a laminated bladder (fabric strip bonded to the latex bladder) to guarantee even more durable inflation.
We know that during matches, the details make the difference. For this F900 ball, we wanted to pay particular attention to the stability of the ball's trajectory to ensure players and goalkeepers had the best chance of following the ball through the air. To do this, we tested different types of outer panelling and chose the one which showed the best results. This 12-panel design combined with the embossed lines is exclusive to Kipsta.
We have conducted numerous lab tests on the ball in order to provide the excellent accuracy that football players require while competing. Each test is outlined below.
Between 430 and 445g in size 5
Between 68.5 and 69.5 cm.
Average measured variation: maximum 1.5%.We measure the football's sphericity at 16 different points and examine the recorded discrepancies.If the discrepancy is greater than 1.5% (FIFA PRO Standard), our engineers are tasked with improving the sphericity to ensure a consistent bounce.
We inflate the ball to the recommended pressure (meaning 0.8 bar).72 hours later, the ball must not lose more than 15% of its pressure, meaning approx. 0.1 bar. The pressure after 72 hours must, therefore, be at approx. 0.7 bar.This also means that it is quite normal for a ball to lose pressure after a few days.
We simulate rainy playing conditions in a lab by leaving the ball to sit in 2cm of water on a pivoting support whilst subjecting it to 250 compressionsAt the end of the test, the ball can not have absorbed more than 10% of its weight, 40 grams for the F900. This is one of the advantages of the thermobonded process; water absorption is limited in comparison to other processes (machine-stitched for example)
Between 135 and 155 cm with a maximum difference of 10 cm between the ball's highest and lowest bounce. Each ball is dropped 10 times on a steel plate from a height of 2 metres.The bounce obtained with the F900 ball complies with FIFA Pro requirements.
The most demanding test that this ball is subjected to is the machine shot test.Withstands up to 2500 shots against an inclined concrete surface at 50 km/h at a distance of 2.5 m.At the end of the test, we check:- the ball's general state: stitching must withstand this test- the circumference: it must not have increased by more than 1.5 cm- the sphericity: it must not have varied by over 1.5%- the pressure: the ball's loss of pressure must not exceed 0.1 bar
100% Satisfaction Guarantee
DECATHLON MAKES THE DIFFERENCE
RESEARCH AND DEVELOPMENT : delivers high-quality cost-effective products
STATE-OF-THE-ART PRODUCTION PROCESSES : minimize manufacturing costs
OPTIMIZED SUPPLY CHAIN : reduces retail price
MINIMAL RETAIL FOOTPRINT : lowers overhead and indirect costs
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.