Our trekker designers designed this freestanding 3-season dome tent for 2 people seeking a simple, user-friendly product. 1 entrance & 1 front porch. With its classic dome structure, it offers a simple and practical living space. The additional front tent pole creates a porch that can accommodate 2 bags of about 50 L. 2 pockets.
Compact & compressible 10 L bag
Dimensions 39x13x14 cm
Room height 105 cm
1 door. 1 porch. 2 pockets.
Sleeves for the tent poles.
Flysheet > 2000 mm.
Groundsheet > 5000 mm.
Door with mosquito net. Two-way zip on the door
1 air vent
Total weight 2.6 kg
Parts can be separated to share the load.
Flysheet 865 g
Room 730 g
Tent pole kit 609 g
Tent pegs (13 items) 189 g
Bags 77 g + 18 g
Guy ropes 90g
Repair kit (ferrule, patch) 20 g
To preserve your product and improve the ground and weather protection, you can add a survival blanket type groundsheet to your Trek 100 2P tent.
Weights, volumes & dimensions may vary slightly due to production tolerances.
Length of the room 210 cm
Width of the room 120 cm
Height of the room 105 cm
Total height 115 cm
1 x 60 cm deep front porch that can accommodate 2 backpacks of about 50 L, as well as 2 pairs of hiking boots. This space is for organising and storing your bivouac equipment. 2 pockets in the room, 1 ceiling hook to hang a lamp and loops to set up an adjustable clothes line across the tent for good habitability.
Lightweight shatterproof and frost-proof aluminium tent poles: 7001 Ø 8.5 mm.
Length 17 cm, Ø 6.1 mm.
Non-anodised 7075 aluminium for maximum strength and lightness while lowering the environmental impact.
Traditional dome shape to make the structure free-standing. A front tent pole with a peak provides additional volume and therefore a more habitable porch.
Extremely quick pitching/striking. The flysheet and bedroom are pre-assembled. Then insert the tent poles in the sleeves provided on the flysheet. It is also quick to strike.
To store the tent in its bag, just fold up the tent until it is as wide as the back, fold up the tent poles into a bundle and place them on the bedroom or the flysheet, and roll everything up into a small bundle that will fit in the bag.
The Forclaz tents are tested fully pitched in the laboratory: 200 L/sqm/h for 4 hours, ie equivalent to a tropical rain shower. They are also tested by a panel of users in the field.
75-denier PES polyester flysheet and groundsheet, polyurethane coating on the inside, water repellent treatment on the outside.
Seams taped with heat-sealed strips.
Multi-component & water repellent 75D polyester bedroom that is breathable, provides protection from the wind and reduces condensation.
We test all our tents in a wind tunnel on a rotating platform where we can expose each side of the tent to the wind.
To test its wind resistance, the tent must be properly pitched, taut but not stretched, with all the guy ropes in position around the tent. It will remain habitable at wind speeds of 60km/h, measured near ground level.
Our tents are certified by the independent CSTB laboratory in Nantes.
Bedroom with mosquito screen for ventilation and water-repellent fabric to protect from condensation and draughts. There is an air vent at the back of the tent.
To reduce condensation inside the tent, it must be correctly assembled with a taut canvas, but not excessively so. The use of the air vent and good air circulation reduces moisture inside.
3 season tent: your tent will protect you from the harsh weather conditions you can encounter in the spring, summer or autumn. It will withstand light snowfall but is not designed to withstand heavy loads that would weigh on the structure.
In case of snow, remember to shake your tent regularly in order to bring down any snow that has accumulated to avoid putting too much weight on the structure of your tent.
We have decided to use "biton" thread for this tent's bedroom fabric (one out of every two threads is dyed to reduce the impact).
Textile dyeing requires a lot of water but also produces waste water from the dye baths. To reduce this impact on the environment, we use only one mass-dyed yarn out of every two and thereby reduce our consumption and our impact on water.
The tent pegs are not anodised.
We have stopped using nitric and phosphoric acids to fix the colour because its only function is to make them look aesthetically pleasing.
Your tent pegs can have an "untreated" or "used" appearance but they retain all their technical characteristics and strength.
The fabric of the room is bulk dyed, which reduces water consumption and CO² emissions.
These actions help to reduce the environmental impact of your product.
As designers and users who love our field, we care about the durability of our products, which is why all our tents are designed to be repairable.
You will find spare parts (poles, bedrooms, etc) in store or in your Decathlon store's workshop, on our website or via e-mail support.decathlon.com
In the event of a problem, you can have your tent inspected in your Decathlon store.
Repair kit (ferrule, patch): 20 g
Composition / advice
100% Satisfaction Guarantee
DECATHLON MAKES THE DIFFERENCE
RESEARCH AND DEVELOPMENT : delivers high-quality cost-effective products
STATE-OF-THE-ART PRODUCTION PROCESSES : minimize manufacturing costs
OPTIMIZED SUPPLY CHAIN : reduces retail price
MINIMAL RETAIL FOOTPRINT : lowers overhead and indirect costs
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.