For 2 to 3 people, up to a maximum of 245 kg (540 lbs).
Inflates in 10 minutes with a dual action hand pump.
Side tubes and a wide inflatable floor for good stability.
The bow shape gives the kayak good glide performance.3 keels.
Raised seat for comfort when at rest and when paddling.
Dropstitch floor.Tarpaulin side tubes with pressure relief valves
- 60% Polyvinyl Chloride - Phtalate Free
- 40% Polyester
- 70% Polyvinyl Chloride
- 30% Polyester
INFLATED SIZELength: 410 cmWidth:102 cmFOLDED & BAGGED SIZEHeight:60 cmWidth:40 cmThickness:40 cmWeight:18 kgMaximum floor pressure:0.34 bar (5 psi)Side tube and seat pressure:0.2 bar (3 psi)Number of seats:2 or 3 seatsContent:kayak, bag, repair kit, 3 fins, user guide, inflation connector, strap.PUMP NOT INCLUDEDFor use with an Itiwit double-action hand pump with adapters
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the floor to 5 psi.Finish by screwing the cap back on.Put the floor inside the kayak and strap it at the ends.The floor valve must be aligned with the side tube valves located at the back of the kayak.The floor's position must allow free access to the drain plugs located in the middle of the kayak.
Connect the ITIWIT pump (sold separately) by twisting the pump adapter 1/4 turn and inflate the side tubes to 3 psi.Finish by screwing the cap back on.Each side tube has a pressure relief valve.Its purpose is to evacuate excess air resulting from over-inflation.When this happens, you may notice a hissing sound.This hissing is normal, it can happen during inflation or after prolonged exposure to sun.It will stop once thekayak reaches the correct internal pressure
The seats are high, providing increased comfort for adults in the paddling position.Position the seats on the floor using the velcro areas located under the seat and on the floor.Stow any bags or equipment into the kayak's rear hatch or attach to the rear deck.The boat is ready to be launched.
Thanks to the stiffness of the Dropstitch floor
Remove the seats and slightly deflate the floor to make it easier to rinse out.Rinse the kayak, bottom and seats with clean water after each use to avoid damage from sand, salt water and sun.Open the drain plugs located in the middle of the kayak and at the rear.Tip the kayak to empty out the water.
Make sure that the surface you intend to fold the kayak on is clean. Remove the fins.Deflate the side bladders.The valves are located at the back of the kayak.WARNING:Do not unscrew the pressure relief valves at the front.Fold the floor.Fold the rest of the kayak in half lengthwise.Flatten the front fin base.Lay the rolled floor on the front end.Roll the kayak to the rear end.Strap the kayak.
Once dry and clean, the kayak should be stored in a dry and shady place, protected from significant temperature changes.The kayak can be stored folded but if you have enough space, storing it flat and slightly inflated will extend its life.
Spare parts are available for Itiwit X100+ kayaks from after-sales service.Visit the workshop at your nearest Decathlon store to collect or order some.Dropstitch floor:8561072Pressure relief valve:8561069Carry bag:8605095Paddle rip-tab:8561070
We recommend that you practice with a buoyancy vest.
100% Satisfaction Guarantee
DECATHLON MAKES THE DIFFERENCE
RESEARCH AND DEVELOPMENT : delivers high-quality cost-effective products
STATE-OF-THE-ART PRODUCTION PROCESSES : minimize manufacturing costs
OPTIMIZED SUPPLY CHAIN : reduces retail price
MINIMAL RETAIL FOOTPRINT : lowers overhead and indirect costs
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.